tonepad -- FX projects

Sans Amp GT-2 -- ADVANCED

Description
Sans Amp GT-2, Analog Amp Simulator

Status
VERIFIED

Layouts
tonepad_sansampgt2-2007.pdf 209.5 KB-- Sin Amp Rev.3.Feb.27.2007

Order Printed Circuit Boards

Sans Amp GT-2 US$ 11.00

Comments

Analog amp simulator, capable of fenderish, marshallish, boogie-ish sounds.

This project is difficult and involves quite a bit more offboard wiring than the average stompbox.

The 2004 pdf is verified, if you decide to build it you're on your own, I will only answer questions from people who bought the pcb. Sorry about that.

Any E-B-C pinout NPN transistor can be used (2N5088, 2N3904)

*Thanks to Jeremy Lujacummins for tracing and drawing the original schematic!

The transistor should be 2N5088 (or similar).

Apparently Small Bear is now stocking the same switch pictured here. So look for it or email Steve to find out how to get it!

For offboard wiring instructions check the offboard wiring project page.

Buy Parts At
Small Bear Electronics

Images
tonepad_sansampgt2wiring.jpg 58.5 KB-- Sans Amp GT2 build with switches wired
AlcoswitchInfo.jpg 56.8 KB-- How to wire the ALCO switch available at SmallBear

Sounds
tonepad_sans_amp_gt2_clone_-_cody boy_-_combo - hi gain.mp3 283.8 KB-- SansAmp GT2 sound sample by "Cody Boy"
tonepad_sans_amp_gt2_clone_-_cody boy_-_combo_-_medium gain.mp3 210.0 KB-- SansAmp GT2 sound sample by "Cody Boy"
tonepad_sans_amp_gt2_clone_-_cody boy_-_combo_-_tweed.mp3 217.7 KB-- SansAmp GT2 sound sample by "Cody Boy"
tonepad_sans_amp_gt2_clone_-_cody boy_-_line_-_hi gain.mp3 223.4 KB-- SansAmp GT2 sound sample by "Cody Boy"
tonepad_sans_amp_gt2_clone_-_cody boy_-_line_-_medium gain.mp3 242.0 KB-- SansAmp GT2 sound sample by "Cody Boy"
tonepad_sans_amp_gt2_clone_-_cody boy_-_line_-_tweed.mp3 239.1 KB-- SansAmp GT2 sound sample by "Cody Boy"

Build Reports
83 build reports submitted.
View build reports
Submit a Build Report