| Title | Description | Create Date | Created By | Project |
|---|
| Modifying a TS9 to TS808 | How to convert an original Ibanez TS9 to TS808 specs, including opamp replacement if necessary. | 6/4/2002 | Matt Burnside | |
| Making a PCB using Press 'N Peel Blue | This photoessay will guide you through the process of making a circuit board using Press 'n Peel Blue that is ready to etch. | 6/8/2002 | Matt Burnside | Rebote Delay |
| Etching a Board Using Ferric Chloride | Ferric Chloride is a popular and easy-to-obtain etchant. This photoessay guides you through the process of using it on the board we created in the essay on Press 'n' Peel Blue. | 6/15/2002 | Matt Burnside | Rebote Delay |
| Big Muff Ho! | Making a BMP... by Lpstudio AKA Ron Down.
| 12/26/2002 | Francisco Peņa | Big Muff Pi |
| RTS Boards | Pictures of some of the Ready To Soler boards we sell. | 12/12/2006 | Francisco Peņa | |
| Building a Tube Screamer | Step by step pictorial on how to make a Tube Screamer(r) using our ready to solder printed circuit boards. | 11/15/2005 | Francisco Peņa | Tube Screamer |
| Ross Compressor | Photo sequence on populating the ready to solder PCB you can BUY from us. | 11/17/2005 | Francisco Peņa | Ross Compressor |
| Pedalboards | Pictures of pedalboards.
Email us pictures of your pedalboards with a small description so we can post them. | 5/23/2006 | Francisco Peņa | |
| Stereo microphone in a mint tin | Amplified stereo ambience microphone built into a mint tin. | 6/22/2006 | Francisco Peņa | StereoMicroamp |
| Terry Clarke's Rosscomp | Check out Terry's Ross compressor. | 7/24/2006 | Francisco Peņa | Ross Compressor |
| PCBs for Sale | Photos of our PCBs, showing the solder side, all have silk screening on the component side as shown in the RTS photoessay. | 8/23/2007 | Francisco Peņa | |
